Smartphone Videography - dslr camera stabilizer - dslr rig - SHENZHEN YELANGU TECHNOLOGY CO., LTD.

Product Products

HOT PRODUCT / Products

YELANGU MIC09

发布时间： 2020 - 12 - 31

Professional Interview MicrophoneThe noise caused by shaking can be effective shielded by the damping structure.Cardioid DirectionAdjustable sensitivityAdjustable LOW-CUT function.Real-time MonitoringProfessional Interview Microphone MIC09Internal Professional Cardioid Pickup ConfigurationThe pickup distance with a mobile phone is 0- 1.5 meters, and the pickup distance with a camera is 0- 4 meters.Professional Anti-noise MicrophoneAnti-noise circuit board, powerful noise reductionCardioid Direction RecordingCardioid directional recording, leading to a strong directivity, shielding environmental noiseAdjustable sensitivity with the external knob switch.Adaptable for different soundSensitivity AdjustmentExternal Low-freque...

YEALNGU MIC08

发布时间： 2020 - 12 - 31

The microphone is assembled with a shock absorbing structure that can withstand severe shaking.External configuration of windshield, effective noise reduction.The audio cable is 60-cm long for easy connection of various devices.It's available for most phones and cameras.

MX5 2.4G Wireless Microphone

发布时间： 2020 - 12 - 07

This microphone is commonly used for news interviews,film and television shooting, personal interviews, program hosting and other occasions.Small, portable and the recording sound is clear.The sound quality is quite good.Product comes with a microphone.Clip it to collar or hold it in hand to record.In windy days or noisy environment,we can shield the noise by the wired lapel.We can connect it to the phone or the camera with a connection line.( Note: 4P connector for the phone, 3P connector for the camera)

查看详情

立即咨询

Contact

Brand： YELANGU

Email: info@yelangu.com

TEL： 86 0755 29973977

Store www.shoulder-rig.com

web： http://yelangu.com

SHENZHEN &
CHONGQING CHINA

Page: Home → Product → Mobile Video Gear

产品列表

PC08 Handle Bracket Phone Clip

1. The product is divided into three parts: the handle part, the bracket part and the mobile phone holder part. The three parts are connected by 1/4 screw.2. The splint of the mobile phone clip can be freely adjusted according to the shooting demand.3. The silicone pad with the phone can prevent the phone from sliding and getting hurt.4. The upper end of the splint and the left side of the bracket are provided with cold shoe connectors for instant connection to other photographic equipment.5. The upper and lower ends of the handle are provided with 1/4 thread for instant connection to other photographic equipment.6. Three parts of the product can be disassembled and used separately.

了解更多

在线订购

PC06 Aluminum Alloy Cage For Smartphone

1. The whole material is made of aluminum alloy and processed by CNC, which is light and firm without deformation.2. It can be used for most types of mobile phones with the width between 46mm and 87mm.3. The cage body has multiple cold shoe connectors and screw interfaces for instant connection to various auxiliary accessories.4. Fine adjustment design of mobile phone clip, easy to install; The clamping place of the mobile phone is equipped with silicone cushion to prevent damage to the mobile phone.

了解更多

在线订购

PC05 Aluminum Alloy Cage For Smartphone

1. The whole material is made of aluminum alloy, which is light and firm without deformation.2. It can be used for most types of mobile phones with the width between 46mm and 87mm.3. The cage body has multiple cold shoe connectors and screw interfaces for instant connection to various auxiliary accessories.4. Fine adjustment design of mobile phone clip, easy to install; The clamping place of the mobile phone is equipped with silicone cushion to prevent damage to the mobile phone.

了解更多

在线订购

PC03 Rotate Phone Clip

cage for smartphone1. The phone clip is 124* 32* 42mm in length ( adjustable width: 41-86mm). 2. The bottom of the splint is provided with 1/ 4 thread holes for instant connection to other photographic equipments. 3. The splint can be freely adjusted vertically and horizontally according to the shooting demand. 4. The base is provided with 1/ 4 thread, which can be easily and quickly installed on various shooting equipment and equipment. 5. The silicone pad can prevent the mobile phone from sliding and getting hurt. 6. The upper end of the splint is provided with a hot boot for instant connection to other photographic equipment.

了解更多

在线订购

PC02A Double Handle Bracket For Phone Shooting( Plastic)

Smartphone video rig1.For installing moblie phone to move shooting2.The handle can be installed on the various sides of the cage to realizemobile phone horizontal or vertical shooting.3.The phone holder has springs and cushions for easy clamping and does not scratch the phone.4.Multiple cold shoe interfaces and 1/4 threaded interface on the top for mounting other device.5.Light weight,support mobile phone long shooting.6.The handle grip has 1/4 screw and thread hole can be used with othershooting device or use with dslr camera directly.7.Adapted for both hands for steady shooting.

了解更多

在线订购

PC02 Smartphone Video Rig( Plastic)

Smartphone video rig1.For installing moblie phone to move shooting.2.The handle can be installed on the various sides of the cage to realize mobile phone horizontal or vertical shooting.3.The phone holder has springs and cushions for easy clamping and does not scratch the phone.4.Multiple cold shoe interfaces and 1/4 threaded interface on the top for mounting other device.5.Light weight,support mobile phone long shooting.6.The handle grip has 1/4 screw and thread hole can be used with other shooting device or use with dslr camera directly.7.The item is suitable for mobile phones under 6.6inch(include 6.6inch).

了解更多

在线订购

共16条页次2/3首页上一页123下一页尾页